New Product – Offshore Triplex Pump

GazaliBawavi Group
CPFG OFFSHORE  ·  ATEX ZONE II

HIGH PRESSURE

TRIPLEX PUMP

Compact. Certified. Diesel-Hydraulic.
From deck to first stroke in under 30 minutes.
DNV 2.7-1 ATEX ZONE II 10,000 PSI DIESEL-HYD
GazaliBawavi High Pressure Triplex Pump

10,000 PSI

Max Pressure

1.25 BPM

Flow Rate

130 kW

Pump Rating

1.5 MT

Weight (WLL)

Applications ›
Hydrostatic Testing
Well Intervention
HP Cleaning
BOP Charging
Chemical Injection
Umbilical Flushing
CPFG Offshore
Cold Cutting

Product Overview

Built for Offshore.
Engineered for Zone II.

 

● ATEX Zone II ● Explosion-Proof ● DNV 2.7-1

Ketika operasi offshore Anda membutuhkan tekanan tinggi tanpa gangguan di lingkungan ATEX Zone II, GazaliBawavi High Pressure Triplex Pump hadir tanpa kompromi. Dirancang khusus untuk aplikasi CPFG offshore, sistem diesel-hydraulic ini sepenuhnya terkontainerisasi.

Dengan bobot hanya 1.5 MT dan footprint 1450×1450×1600 mm, dapat ditempatkan di mana unit konvensional tidak bisa. Dari crane-on hingga tekanan pertama: kurang dari 30 menit. Diterima di seluruh instalasi offshore besar dunia.

 130 kW Diesel-Hydraulic Triplex Pump — Factory Tested

130 kW Diesel-Hydraulic Triplex Pump — Factory Tested

Inside The Unit

Fully Containerized — Plug & Play Ready

 


Equipment inside container — GazaliBawavi High Pressure Triplex Pump

Drive System

80 HP Diesel Zone II Power Pack + Hydraulic Motor

Triplex Pump

130 kW High-Pressure Diesel-Hydraulic

Mounting

DNV 2.7-1 Certified Offshore Skid

Interior unit — fully assembled, zero on-site assembly required. Hydraulic hose plug-and-play connection.

Technical Data

Component Specifications

 

System Specifications
Unit Type Compact Containerized HP Triplex Pump
Mounting DNV 2.7-1 Certified Offshore Skid
Hazardous Area ATEX Zone II Rated
Drive System 80 HP Diesel Zone II PP + Hyd. Motor
Pump Rating 130 kW Diesel-Hydraulic Triplex Pump
Max Pressure Up to 10,000 PSI (690 bar)
Flow Rate Up to 1.25 BPM (198 L/min)
Fluid End Kits 45 mm  ·  40 mm  ·  20 mm
Charge Pump Hydraulic Centrifugal — Included

Physical Specifications
L × W × H 1450 × 1450 × 1600 mm
Weight (WLL) 1.5 MT
Lifting Standard DNV 2.7-1

Competitive Advantage

Why Operators Choose Us

 

🔒

Zone II Safe — Always

Fully enclosed, explosion-proof. Deploy on any offshore platform — zero extra modifications.

⚡

Zero Rig-Up Time

Plug-and-play hydraulic hose. Crew starts immediately — not assembling equipment for hours.

🔧

Field-Serviceable

On-location piston change-out. Three kits (45/40/20 mm) for instant reconfiguration to any job.

🏆

DNV 2.7-1 Certified

Accepted on all major offshore installations worldwide — no re-certification delays.

Safety & Reliability

Built-In Protection Systems

✓ Over-Pressure Safety System
Auto-shutdown, adjustable 10–10,000 PSI set points — protects crew & equipment.
✓ Adjustable Discharge Pressure Shutdown
Dedicated relief valves protect all downstream piping and equipment.
✓ Hydraulic Centrifugal Charge Pump
Self-contained, factory tested and deployment-ready.

Factory Certified Data

Pump Performance Test Report

 

Model: 3D3-K20000 Medium: Clear Water Viscosity: 1 cSt Ambient: Normal
PUMP PERFORMANCE TEST DATA
Factory QC Certified
Run Pressure Flow Rate Shaft Power Pump Speed Result
(MPa) (Avg L/min) (Avg kW) (rpm)
Run 1 30 MPa 168 96 320 ✓ PASS
Run 2 35 MPa 168 110 320 ✓ PASS
Safety Valve: 38 MPa  | 
Brg. Temp (R1): 32/35°C  | 
Brg. Temp (R2): 35/36°C  | 
Noise: 67/70 dB(A)  | 
Speed before gearbox: 1500 rpm
Each run: 3 repeated measurements — all consistent. NPSH per design spec. Factory QC protocol.

Ready to Deploy on Your Next Offshore Operation?

Full mobilization planning & on-site technical support across Indonesia & Southeast Asia.
Tailored solutions for every CPFG project.

Request a Quote →

GazaliBawavi Group

✉  sales.borneo@gazalibawavigroup.com

🌐  www.gazalibawavigroup.com